Kawasaki VULCAN 1700 VOYAGER Manuel d'utilisateur télécharger pdf

Installation Instructions

Assembly Instructions

Description: CB Radio Kit Model: Vulcan 1700 Voyager

Part Number: K10400-037 Approximate

Assembly Time:

60 min.

Installation of this accessory should be performed by a qualied technician with the proper tools and

equipment.

If you are in doubt as to any part of the installation, please ask your authorized Kawasaki dealer to

complete the installation. Please note that Kawasaki cannot assume any responsibility for damage

resulting from incorrect installation.

Parts List Tools Required:

Seq. Description Qty Tool Description

1. CB Radio Module Assembly 1  Drill Motor

 Scribe

 1/16” Drill Bit

 7mm (1/4”) Drill Bit

 5mm Hex Head Driver

 Socket Driver

 10mm Socket

 Philips Head Screwdriver

2. M6 x 30mm Bolts 2

3. CB Antenna Cable 1

4. CB Antenna Base 1

5. M6 x 20mm Philips Head Bolt 1

6. CB Ground Strap 1

7. M6 Lock Nuts 2

8. Lock Washer 1

9. Belleville Washer 1

10. M6 Cap Nut 1

11. Cable Ties, 6 inch 8

12. Cable Tie, 14.5 inch 1

13. CB Antenna Mast 1

14. Star Washer 1

Installation Preparation

Parts Removal

z Set bike securely on side stand on level ground. Switch off

ignition and remove key.

z Refer to the VN1700 Voyager Service Manual and remove the

fairing. Remove the front and rear seats, fairing and left fairing

lower cover (black piece).

z Open the trunk and remove the tray by pressing the center of

the four lock rivets.

z Remove the fuel tank mounting bolts and lift the tank to expose

the frame.

1 2 3 4 5 6

Assembly Instructions 1
Installation 2

Résumé du contenu

Page 1 - Assembly Instructions

Installation InstructionsAssembly InstructionsDescription: CB Radio Kit Model: Vulcan 1700 VoyagerPart Number: K10400-037 Approximate Assembly Time:6

Page 2 - Installation

Installation Install CB Module z Mount the CB module using the two supplied 6 x 30mm bolts on the top and re-using the lower bolt. Tighten all three

Page 3

z Route the other end of the antenna cable along the chassis and under the center of fuel tank. Follow the routing of the AM/FM antenna cab

Page 4

z Install the antenna base from the outside of the trunk. Install Belleville (curved) washer and locknut onto the threaded brass post. Do not over-

Page 5

Please check/adjust all fasteners in regular intervals.© Kawasaki Motors Corp., U.S.A., August 2009 z After conrming proper operation of the CB radio

Page 6

Antenna Base Drilling Template

Commentaires sur ces manuels

Pas de commentaire

Kawasaki VULCAN 1700 VOYAGER Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Radio Kawasaki VULCAN 1700 VOYAGER. Kawasaki VULCAN 1700 VOYAGER User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels